Fish Bench Woodworking Plans

Our Salmon Fish Bench is uniquely designed and very easy to build. For those of you looking for a woodworking project that is a "Craft Show Winner", look no more. This is it...  the "Salmon Fish Bench Woodworking Plans". It's very easy to build, because of our 24" x 36" blueprints that have  Step-by-Step Instructions, with Detailed Illustrations and Full Size Templates. You don't have to re-draw the plans from a sheet of paper, you can get started right away.  The Chair measures: 38 1/2" H x 56 1/2" W x 22 1/2" D.

For more information on the Salmon Fish Bench Woodworking Plans to to  http://www.gcwoodworks.com/Salmon%20Bench.htm or go to Gold Country Woodworks at http://www.gcwoodworks.com

NEW “Westport Adirondack Chair - Revised Woodworking Plans”

The NEW "Westport Adirondack Chair - Revised" Woodworking Plans is a updated design of the first Adirondack Chair: the "Westport", created in 1903, by Thomas Lee. The characteristics of the 1903 version is a single back chair with an inclined seat and wide arms.  Designer, Jack Briscoe's 2011 version of the Westport, has a triangle theme and he has incorporated modern day joinery.  He used pocket-screw joinery, which involves drilling a hole at an angle into one board and then joining it to a second board with a self-tapping wood screw.  Pocket hole joinery has become the new standard for strong, precise wood construction.  Also in the construction of the chair he used wooden biscuits. An oval-shaped, highly-dried and compressed wooden biscuit, (usually beech), is covered with glue which expands the biscuit, further improving a bond that is often stronger that the wood itself.  Biscuits also has become the new standard for strong, precise wood construction.

The plans come with Step-by-Step Instructions, Detailed Illustrations and the best of all: Full Size Templates. You don't have to spend hours to re-draw the plans from a 8 1/2" x 11" sheet of paper that you downloaded from the internet.  The Chair measures 35" W x 32" D x 35" H.

Jack Briscoe has been designing Award Winning woodworking plans and craft plans for the past 20 years.  It all started back in 1990 with a small display ad in a woodworking magazine.  Today, he sells his woodworking plans to woodworkers all over the world.  They can be found on the Internet, Woodworking Catalogs, Tool Catalogs, Craft Catalogs, as well as retail stores throughout the United States and in Canada.

For more information on the  “Westport Adirondack Chair - Revised Woodworking Plans”  go to   http://www.gcwoodworks.com/westport-adirondack-chair.htm

Wine Barrel Funtiture Woodworking Plans

The Wine Barrel Furniture is handcrafted from recycled oak wine barrels and good old fashioned craftiness.  Gold Country Woodworks, “Wine Barrel Adirondack Chairs” is one of the most comfortable chairs you'll ever sit in.  Jack Briscoe, the Award Winning designer, tells us that his Wine Barrel Adirondack Chairs design enables you to “Relax in Comfort”, because of the lower curved back and the deep curved contoured seat your body to actually mold to the chair. The chair provides maximum comfort combined with a high back design that creates a chair that is truly a joy to sit in.

One of the first things you will notice during construction of the Green, Ergonomic Wine Barrel Furniture is the very pleasant aroma of the wine from the barrel. But, once the construction is completed and you seal the chair the aroma will dissipate.

 The Wine Barrel Furniture is so very easy to build that even a novice woodworker will have no problems in construction.  The woodworking plans contain Step-by-Step Instructions, Detailed Illustrations, and best of all, Full Size Templates, so you won’t have to redraw the plans from a 8 1/2" x 11" plans that you downloaded from the internet. 

Everyone who builds the chair has a very enjoyable woodworking experience.  One of the first things you will notice is the very pleasant smell of the wine from the barrel.  You’ll also notice that there is very little cutting.  There are a total of 25 Staves that are used in the construction of the chair, yet you only cut 6 of the Staves at first.  Then when the chair is finished, you will cut the ends off another 10 Staves.  For more information go to http://www.gcwoodworks.com/Wine-Barrel-Adirondack-Chair-Large.htm

          

Baby-Sitter Woodworking Plans and The Best Way to Glue Dowels

Baby Sitter Woodworking Plans... All it Takes Is Just A Flip And A Twist!

Space can be a problem when you only have room for one piece of baby furniture, but you need three pieces. To solve this problem we designed the Baby-Sitter. With just a twist and a flip, the Baby-Sitter, turns into a Rocking Horse, a Desk and Seat, or a High Chair. The Baby-Sitter is three chairs in one and is both functional and fashionable. This will surely become a treasured heirloom that will be handed down from generation to generation. By request we have designed a Teddy Bear Sitter; Plan No. 201. It's half the size of the Baby-Sitter that's just right for your child's Teddy Bear or Doll.



                  THE BEST WAY TO GLUE DOWELS


When doweling pieces together, sand a small flat on one side of each dowel before inserting them. This allows any excess glue to escape when you clamp the joint. If you don't let the glue escape, the pressure could force the joint open again.

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Woodworking Tips & Sling Chair Wood Plans

Our uniquely designed and easy to build Adirondack Sling Chair is even more comfortable because we have added a canvas sling.  This sling actually molds to your body when you sit in it.  the Adirondack Sling Chair still has the wide arms, the perfect place to rest your elbows and hold a tall glass of lemonade, a plate of food or a book. If you add one of our footrests, you may never get up. Save time and money and order our special Corrosion Resistant Hardware Kit that includes all the hardware needed.

Adirondack Fish Chair and Footrest Woodworking Plans

Adirondack Lounge Chair Woodworking Plans & Woodworking Tips

Christmas Reindeer in August?

I not sure why, but I'm getting orders, alot of orders for my Christmas Reindeer and Sleigh Woodworking Plans.  Is this the start of the holidays or is it that I have them on SALE...  you can save 33%.

Christmas Reindeer Sleigh Woodworking Plans
Our Reindeer Sleigh is very easy to make from our Full Size Templates... Simply trace the Full Size Templates onto your wood and then cut out and paint... It's that simple! This Reindeer Sleigh is designed to go with the Large Christmas Reindeer Plans #6901. Christmas Reindeer Sleigh measures: (19" High x 28" Long x 21" Wide).
(Reindeer sold separately) (Shown above is the Large Reindeer).  For more information go to http://www.gcwoodworks.com/christmas_reindeer_sleigh_woodworking_plans.htm

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Wine Barrel Adirondack Furniture Woodworking Plans
Our Wine Barrel Footrest, Table/Stool is designed to go with our Wine Barrel Adirondack Chairs #5851 and the Wine Barrel Adirondack Chairs #5852.



You are about to have the most enjoyable woodworking experience in building our Green, Ergonomic Wine Barrel Adirondack Furniture. One of the first things you will notice during construction is the very pleasant aroma of the wine from the barrel. Once construction is completed and you seal the chair the aroma will dissiapate.
Our Wine Barrel Adirondack Chair is one of the most comfortable wooden chairs that you will ever sit in. The curved back, the curved seat and the curved arms allows your body to actually mold to the chair. The chair provides maximum comfort combined with a high back design that creates a chair that is truly a joy to sit in.  For more information go to Gold Country Woodworks http://www.gcwoodworks.com/Wine-Barrel-Adirondack-Chair-Large.htm

Furniture Plans - Baby Sitter Woodworking Plans

Furniture Plans by Gold Country Woodworks... 

     
The Baby Sitter is one of our very popular furniture plans.  The Child Furniture Plans are full scale wood plans.    It's very easy to build, because of the step-by-step instructions, with detailed illustrations and we have full size templates. You don't have to re-draw the furniture plans from a small sheet of paper that you downloaded off the internet.   Our furniture plans are 24" x 36" blueprints.  Baby Sitter Furniture Plans...   All it Takes Is Just A Flip And A Twist!
Space can be a problem when you only have room for one piece of baby furniture, but you need three pieces. To solve this problem we designed the Baby-Sitter furniture plans. With just a twist and a flip, the Baby-Sitter, turns into a Rocking Horse, a Desk and Seat, or a High Chair. The Baby-Sitter is three chairs in one and is both functional and fashionable. This will surely become a treasured heirloom that will be handed down from generation to generation. By request we have designed a Teddy Bear Sitter; Plan No. 201. It's half the size of the Baby-Sitter that's just right for your child's Teddy Bear or oll.  For more information go to http://www.gcwoodworks.com/baby-sitter_woowworking_plans.htm   or http://www.gcwoodworks.com

Christmas Reindeer and Sleigh in August?

Christmas Reindeer & Sleigh Woodworking Plans







What is this: Christmas in August?  Well it seems that I'm getting orders for my Christmas Reindeer and Sleigh Wood plans and I mean I'm getting alot of orders.  I'm not sure what it is?  Well it maybe it's the 33% Off SALE. 

Christmas Reindeer Sleigh Woodworking Plans
Our Reindeer Sleigh is very easy to make from our Full Size Templates... Simply trace the Full Size Templates onto your wood and then cut out and paint... It's that simple! This Reindeer Sleigh is designed to go with the Large Christmas Reindeer Plans #6901. Christmas Reindeer Sleigh measures: (19" High x 28" Long x 21" Wide).  For more information go to  http://www.gcwoodworks.com/christmas_reindeer_sleigh_woodworking_plans.htm

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

NEW Westport Adirondack Chair Wood Plans & Woodworking Tips

My "Westport Adirondack Chair - Revised" is a revised design of the first Adirondack chair: the "Westport" in 1903. The characteristics of the 1903 version is a single back chair with an inclined seat and wide arms. In my version of the Westport, I keep the triangle theme and added my own twist to the chair. I hope that you enjoy it.

Our plans come with Step-by-Step Instructions, Detailed Illustrations and the best of all; Full Size Templates. You don't have to spend hours to re-draw the plans from a 8 1/2" x 11" sheet of paper that you downloaded from the internet. You can get started right away.   For more information go to http://www.gcwoodworks.com/westport-adirondack-chair.htm

Cross Cutting PlywoodCross cutting with a power saw is bound to produce some tear-out. This can be reduced by putting a strip of masking tape along with line of the cut.

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Woodworing Plans for the Rocking Airplane and Wood Working Tips

Rocking Airplanes Woodworking Plans
Capture That Feeling Of Aerial Adventure!
Your child or grandchild can experience a flying adventure without having to leave the house. Designed with 1 1/2" solid wood that will stand up to even the most active young pilots. You'll receive both the Piper Cub and the Fighter Jet in this set of plans.  For more information go to http://www.gcwoodworks.com/rocking_airplanes_woodworking_pl.htm

Better Filtering
If your ship vac has a foam or paper filter that clogs quickly with wood chips, try covering the filter with old pantyhose. This allows the larger, heavier chips to fall off into the canister when you turn the vacuum off.

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Woodworking Tips and NY Adirondack Chair Woodworking Plans

Be the envy of all your friends with our NY Adirondack Chair & Footrest. It will sure be the topic of conversation. Our NY Chair and Footrest is very easy to build, because of our step-by-step instructions, detailed illustrations and best of all; Full Size Templates. You don't have to re-draw the plans. You can get started right away. Save time and money and order our special Corrosion Resistant Hardware Kit that includes all the hardware needed. If you order (3) Hardware Kits, we'll give you the woodworking plans FREE, plus we'll give you FREE Transfer Paper. The Chair measures: 39" H x 44" W x 55" L. For personal use only, not for mass production. For more information go to http://www.gcwoodworks.com/ny-chair.htm
 
Better Filtering


If your ship vac has a foam or paper filter that clogs quickly with wood chips, try covering the filter with old pantyhose. This allows the larger, heavier chips to fall off into the canister when you turn the vacuum off.

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Woodworking Plans and Wood Shop Tips

Gun Rack Woodworking Plans

Beautiful hand crafted wooden Gun Rack.  It has a lower compartment for locked storage of ammunition and accessories and it comes with an optional Intarsia Duck design.  Very easy to build, because of our step-by-step instructions, detailed illustrations and best of all; Full Size Templates.  You don't have to re-draw the plans.  You can get started right away.  Measurements”  41 ¾” H  x  21 ¾” W  x  5” .  For more information go to http://www.gcwoodworks.com/gun-rack.htm

THE BEST WAY TO GLUE DOWELS
When doweling pieces together, sand a small flat on one side of each dowel before inserting them. This allows any excess glue to escape when you clamp the joint. If you don't let the glue escape, the pressure could force the joint open again.
 
For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Adirondack Folding Chair Woodworking Plans & Woodworking Tips

Adirondack Folding Chair Woodworking Plan
















This is our version of a Folding Adirondack Chair. We have designed it for comfort and convenience. The comfort comes from the lower back support, curved back and the contoured seat. As you can see it folds up for easy storage. Save time and money and order our special Corrosion Resistant Hardware Kit that includes all the hardware needed. Don't forget to check out the Adirondack Tables and the Adirondack Foot Rests. Excellent chair. 28" W x 37 1\2" H x 38" L   (When folded: 28" W x 8" H x 52" L)
For more information go to http://www.gcwoodworks.com/adirondack_folding_chair_woodwor.htm
 
SURE FIRE WAY TO REMOVE A WOODEN PLUGS


A sure-fire way to remove a wooden plug that covers a screw head... Drill a 1/8 inch pilot hole through the center of the plug. Than drive a drywall screw through the hole. The hardened drywall screw bottoms on the hidden screw head and forces the plug up and out of the hole.
For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at http://www.gcwoodworks.com// and check out our Wood Plans and Wood Projects.

Wood Plans - the Baby-Sitter & Woodworking Tips

Baby Sitter Woodworking Plans... All it Takes Is Just A Flip And A Twist!

Space can be a problem when you only have room for one piece of baby furniture, but you need three pieces. To solve this problem we designed the Baby-Sitter. With just a twist and a flip, the Baby-Sitter, turns into a Rocking Horse, a Desk and Seat, or a High Chair. The Baby-Sitter is three chairs in one and is both functional and fashionable. This will surely become a treasured heirloom that will be handed down from generation to generation. By request we have designed a Teddy Bear Sitter; Plan No. 201. It's half the size of the Baby-Sitter that's just right for your child's Teddy Bear or Doll. For more information go to http://www.gcwoodworks.com/baby-sitter_woowworking_plans.htm


For That Baby-Fresh Smoothness


As an alternative to wax, you can treat your table saw's table to an occasional sprinkle of baby powder instead.

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at http://www.gcwoodworks.com/ and check out our Wood Plans and Wood Projects.

Woodworking Tips and Bird Houses Plans

Humorous Bird Houses & Bird Feeders Woodworking Plans


Humorous Bird Houses and Bird Feeders Woodworking Plans


A wonderful experience awaits you when you build one or all 10 of our humorous Bird Houses or Bird Feeders. There are actually 5 different bird designs which you can either make Bird Houses or Bird Feeders. They are designed so that just about anyone can build their very own Bird House or Bird Feeder. Our plans have Step-By-Step Instructions, Detailed Illustrations and best of all, Full Size Templates. (Excellent Craft Show Product).  For more information go to Humorous Bird Houses and Bird Feeders Woodworking Plansgo to http://www.gcwoodworks.com/bird_houses_humorous_woodworking.htm

Old Masking Tape

Masking tape gets old in the shop and after a while it won't unroll very well. This is especially true in cold weather. As a remedy, I give a troublesome roll a 10 to 15 second zap in the microwave.

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Woodworking - High Tech Dowel Dryer and Wine Barrel Table & Footerst

Wine Barrel Adirondack Footrest, Table/Stool Wood Plans




Our Wine Barrel Footrest, Table/Stool is designed to go with our Wine Barrel Adirondack Chairs #5851 and #5852.

You are about to have the most enjoyable woodworking experience in building our Green, Ergonomic Wine Barrel Adirondack Chair. One of the first things you will notice during construction is the very pleasant aroma of the wine from the barrel. Once construction is completed and you seal the chair the aroma will dissipate..
The Footrest measures: 14" H x 24" W x 19" L.  The Table & Stool measures: 24" H x 26" W.  For more information go to http://www.gcwoodworks.com/wine-barrel-adirondack-footrest-table-stool.htm

HIGH-TECH DOWEL DRYER


Are your dowels to tight? If that is the case, simply place the dowels in a microwave oven for three or four minutes. This will remove moisture and make the dowels easier to insert. This trick works great for joinery biscuits, too.

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Another NEW Adirondack Wine Barrel Chair Woodworking Plans and FREE Woodworking Tips

Wine Barrel Adirondack Chair (Medium Size)



You are about to have the most enjoyable woodworking experience in building our Green, Ergonomic Wine Barrel Adirondack Chair. One of the first things you will notice during construction is the very pleasant aroma of the wine from the barrel. Once construction is completed and you seal the chair the aroma will dissipate.

Our Wine Barrel Adirondack Chair is one of the most comfortable wooden chairs that you will ever sit in. The curved back, the curved seat and the curved arms allows your body to actually mold to the chair. The chair provides maximum comfort combined with a high back design that creates a chair that is truly a joy to sit in.  The Chair measures:  39" H x 30" W x 41" L.  For more information go to http://www.gcwoodworks.com/wine-barrel-adirondack-chair-medium.htm

Candle Wax


Keep a candle or a block of paraffin in the shop to was wooden drawer runners, sliding machine parts - anything that rubs. The was will make things slide easily.
For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Wood Working Tips & Wine Barrel Adirondack Chair Wood Plans

You are about to have the most enjoyable woodworking experience in building our Green, Ergonomic Wine Barrel Adirondack Chair. One of the first things you will notice during construction is the very pleasant aroma of the wine from the barrel.

Our Wine Barrel Adirondack Chair is one of the most comfortable wooden chairs that you will ever sit in. The curved back, the curved seat and the curved arms allows your body to actually mold to the chair. The chair provides maximum comfort combined with a high back design that creates a chair that is truly a joy to sit in.  For more information go to http://www.gcwoodworks.com/Wine-Barrel-Adirondack-Chair-Large.htm

Color to Dye For


Instead of buying expensive pre-mixed stains to color your projects, try using Rit dye instead. This water-based dye is available in the laundry section of most grocery stores. It comes in a variety of colors, which can be mixed to suite your project. Experiment with a piece of scrap until you get the color and intensity you desire.

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Woodwoking Tips and Adirondack Shark Chair & Footrest Wood Plans

Adirondack Shark Chair & Footrest Woodworking Plan

Our Adirondack Shark Chair & Footrest is uniquely designed and very easy to build.  It has a deep, angled seat and wide arms, the perfect place to rest your elbows and hold a tall glass of lemonade, a plate of food or a book.  For those of you looking for that "Craft Show Winner", look no more.  This is it, the "Adirondack Shark Chair & Footrest".  This set of plans comes with 7 large 24" x 36" blueprints.  It's very easy to build, because we have step-by-step instructions, with detailed illustrations and we have full size templates.  You don't have to re-draw the plans from a 8 1/2" x 11" sheet of paper.  You can get started right away.  Save time and money and order our special Corrosion Resistant Hardware Kit that includes all the hardware needed.  (If you order (3) Hardware Kits, we'll give you the plans FREE)  (That's a $25.95 value - FREE... plus we'll give you FREE Transfer Paper).  The Chair measures 36" W x 36" D x 47" H.  For more information go to http://www.gcwoodworks.com/adirondack_shark_chair.htm 


Candle Wax



Keep a candle or a block of paraffin in the shop to was wooden drawer runners, sliding machine parts - anything that rubs. The was will make things slide easily.

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Free Woodworking Tips and the Adiondack Dolphin Chair Wood Plans

Adirondack Dolphin Chair Woodworking Plans



Our Adirondack Dolphin Chair & Footrest is uniquely designed and very easy to build. It has a deep, angled seat and wide arms, the perfect place to rest your elbows and hold a tall glass of lemonade, a plate of food or a book. For those of you looking for that "Craft Show Winner", look no more. This is it, the "Adirondack Fish Chair & Footrest". This set of plans comes with 7 large 24" x 36" blueprints. It's very easy to build, because we have step-by-step instructions, with detailed illustrations and we have full size templates. You don't have to re-draw the plans from a 8 1/2" x 11" sheet of paper. You can get started right away.  The Chair measures 36" W x 36" D x 47" H.  On Sale today for only $19.95 + S&H  reg. $25.95.  For more information or to order go to  http://www.gcwoodworks.com/adirondack_dolphin_chair.htm

Sanding Belt Cleaner


Get an extra mile from an old pair of crepe-soled shoes or boots. Cut off the heels and use them as you would use a gum-rubber cleaning stick to clean sanding belts.

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Woodworking Project the Adirondack Fish Chair Wood Plans & Free Woodworking Tip

Our Adirondack Fish Chair & Footrest is uniquely designed and very easy to build.  It has a deep, angled seat and wide arms, the perfect place to rest your elbows and hold a tall glass of lemonade, a plate of food or a book.  If you live near a pond, river, lake or an ocean then this chair is a must..  Or even better, if your a fishermen.  In fact what a great gift this makes for any person who likes to fish.  For those of you looking for that "Craft Show Winner", look no more.  This is it, the "Adirondack Fish Chair & Footrest".  This set of plans comes with 7 large, 24" x 36" blueprints.  Once again, the plans come with 7 large blueprints that have step-by-step instructions, with detailed illustrations and the best of all; Full Size Templates.  You don't have to spend hours to re-draw the plans from a 8 1/2" x 11" sheet of paper that you downloaded from the internet.   You can get started right away.  On Sale today for only $19.95 + S&H reg. $25.95.   The Chair measures 36" W x 36" D x 47" H. Don't forget to check out the Adirondack Fish Tables!

THE BEST WAY TO GLUE DOWELS for WOODWORKING


When doweling pieces together, sand a small flat on one side of each dowel before inserting them. This allows any excess glue to escape when you clamp the joint. If you don't let the glue escape, the pressure could force the joint open again.

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Woodworking Plans for Outdoor Projects

Woodworking Plans for Outdoor Projects
Salmon/Fish Bench Woodworking Plans

Our Salmon Fish Bench is uniquely designed and very easy to build. For those of you looking for that "Craft Show Winner", look no more. This is it, the "Salmon Fish Bench". It's very easy to build, because of the step-by-step instructions, with detailed illustrations and we have full size templates. You don't have to re-draw the plans from a sheet of paper. You can get started right away. The Chair measures: 38 1/2" H x 56 1/2" W x 22 1/2" D. For more information go to http://www.gcwoodworks.com/Salmon%20Bench.htm

Our Folding Deck Chairs are extremely comfortable because of the lower back support. The chairs can be custom fit to your body simply by increasing or decreasing the size on a few parts. Both chairs are very easy to build from our Step-By-Step Instructions, Detailed Illustrations and best of all, Full Size Templates. Another reason why the chairs are easy to build, is that most of the parts are made from 2" x 2" redwood stock.

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Remove Wooden Plugs and Humorous Bird Houses Wood Plans

SURE FIRE WAY TO REMOVE A WOODEN PLUG


A sure-fire way to remove a wooden plug that covers a screw head... Drill a 1/8 inch pilot hole through the center of the plug. Than drive a drywall screw through the hole. The hardened drywall screw bottoms on the hidden screw head and forces the plug up and out of the hole.
 
Humorous Bird Houses and Bird Feeders Wood Plans



A wonderful experience awaits you when you build one or all 10 of our Humorous Bird Houses or Bird Feeders. There are actually 5 different bird designs which you can either make Bird Houses or Bird Feeders. They are designed so that just about anyone can build their very own Bird House or Bird Feeder. Our plans have Step-By-Step Instructions, Detailed Illustrations and best of all, Full Size Templates. (Excellent Craft Show Product).

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

Adirondack Round Back Chair Woodworking Plans

Our Adirondack Round Back Chair is uniquely designed and very easy to build. It has a deep, angled seat and wide arms, the perfect place to rest your elbows and hold a tall glass of lemonade, a plate of food or a book. If you add one of our Adirondack Footrests, you may never get up. For more information go to http://www.gcwoodworks.com/adirondack_round_back_chair.htm

For more informatin on the Adirondack Round Back Chair Woodworking Plans go to http://www.gcwoodworks.com/adirondack_round_back_chair.htm or go to  Gold Country Woodworks at http://www.gcwoodworks.com/

Adirondack Shark Chair and Footrest Woodworking Plans

Our Adirondack Shark Chair & Footrest is uniquely designed and very easy to build.  It has a deep, angled seat and wide arms, the perfect place to rest your elbows and hold a tall glass of lemonade, a plate of food or a book.  For those of you looking for that "Craft Show Winner", look no more.  This is it, the "Adirondack Shark Chair & Footrest".  This set of plans comes with 7 large 24" x 36" blueprints.  It's very easy to build, because we have step-by-step instructions, with detailed illustrations and we have full size templates.  You don't have to re-draw the plans from a 8 1/2" x 11" sheet of paper.  You can get started right away.  Reg. price is $25.95 but they are On Sale for $19.95 + S&H.











For more information or to purchase the Adirondack Shark Chair & Footrest Woodworking Plans just go to Gold Country Woodworks web site at http://www.gcwoodworks.com/adirondack_shark_chair.htm

What does Woodworking and Baby Powder have in common?

Woodworking and Baby-Fresh Smoothness
As an alternative to wax, you can treat your table saw's table to an occasional sprinkle of baby powder instead.

Sure Fire Way to Remove a Wooden Plugs
A sure-fire way to remove a wooden plug that covers a screw head... Drill a 1/8 inch pilot hole through the center of the plug. Than drive a drywall screw through the hole. The hardened drywall screw bottoms on the hidden screw head and forces the plug up and out of the hole.

Adirondack Fish Chair & Footrest Woodworking Plans

Our Adirondack Fish Chair & Footrest is uniquely designed and very easy to build.  It has a deep, angled seat and wide arms, the perfect place to rest your elbows and hold a tall glass of lemonade, a plate of food or a book.  If you live near a pond, river, lake or an ocean then this chair is a must..  Or even better, if your a fishermen.  In fact what a great gift this makes for any person who likes to fish.  For those of you looking for that "Craft Show Winner", look no more.  This is it, the "Adirondack Fish Chair & Footrest".  This set of plans comes with 7 large, 24" x 36" blueprints.  Once again, the plans come with 7 large blueprints that have step-by-step instructions, with detailed illustrations and the best of all; Full Size Templates.  You dont have to spend hours to re-draw the plans from a 8 1/2" x 11" sheet of paper that you downloaded from the internet.
Reg. price is $25.95 but they are On Sale for $19.95 + S&H.


For more information or to purchase the Adirondack Fish Chair & Footrest Woodworking Plans just go to Gold Country Woodworks web site at http://www.gcwoodworks.com/adirondack_fish_chair.htm

Proper Lubrication for Tools and our NEW Outdoor Folding Chair Wood Plans

Proper Lubrication Woodworking Tip
When lubricating the moving parts of woodworking tools, less is better. Apply just one or two drops of oil to most joints. If you apply too much, the excess oil will mix with sawdust and make an abrasive goo that causes moving parts to wear faster. In dusty areas, you may want to use dry lubricants, such as silicone or graphite, to prevent this from happening.

Outdoor Folding Chair Woodworking Plans
Our NEW Outdoor Folding Chair, folds open then pulls apart for easy carrying and storage. They are great for most outdoor activities like: backyard decks, boat decks, front porches, backyard lawns, at the beach, in the campgrounds, and in the garden. The chair can also be constructed for a smaller person or to adjust the seat and back. The reasons why our customers think that we have the best woodworking plans; is because of our simple to follow Step-by-Step Instructions, Detailed Illustrations, Material List, and best of all; Full Size Templates. Just trace the full size templates onto your wood and cut! You don't have to spend hours redrawing the plans that you downloaded off of the internet.


Chair Dimensions: 28" H x 34" D x 2" W
Outdoor Folding Chair Woodworking Plans  #509  $9.95 + S&H

For more Award Winning Woodworking Plans go to our Website Gold Country Woodworks at www.gcwoodworks.com and check out our Wood Plans and Wood Projects.

What does Woodworking, Beer and Wine have in common?

What does Woodworking Beer & Wine have in Common?
Well it's our Woodworking Plans...

Beer: Beer Bottle Adirondack Chair & Footrest Woodworking Plans
http://www.gcwoodworks.com/Beer%20Bottle%20Adirondack%20Chair%20&%20Footrest.htm



Wine: Wine Barrel Adirondack Furniture Woodworking Plans
http://www.gcwoodworks.com/wine-barrel-furniture.htm



For more Award Winning Woodworking Plans go to:   http://www.gcwoodworks.com/

Cleaning Saw Blades & Civil War Camp Chair Wood Plans

Cleaning Saw Blades & Other Steel Tools


Use coal oil to clean rusted tools. Soak in pure coal oil over night, in the morning scrub lightly with a non steel scrubber. The coal oil leaves a protective film on the tools.
Submitted Mr. Murphy

Civil War Camp Chair Woodworking Plans

This Civil War Camp Chair woodworking plan, like all of our plans for wood projects are actually LARGE woodworking blueprints and every woodworking plans for our wood projects have Step-By-Step Instructions, Detailed Woodworking Illustrations and best of all, our plans for wood projects have Full Size Woodworking Templates. There is no need to redraw our woodworking plans for wood projects,  you can get started right away woodworking!  This is an Authentic Civil War Camp Folding Chair folds flat for easy carrying and convenient storage. This is a very easy chair to build.  Available in Wood Plans or Chair Kit with Black Walnut.

http://www.gcwoodworks.com/civil_war_camp_chair_woodworking.htm

http://www.gcwoodworks.com/

 

Where to Put the Tack Cloths?

Tack cloths have a bad habit of drying out after a couple of uses. To keep a used one available, bunch it up into a loose ball and place it in a plastic food storage container with a tight lid.
For more woodworking tips go to...  http://www.gcwoodworks.com/Tips%20of%20the%20Day.htm

Library Chair Woodworking Plans


You Won't Believe How Useful This Chair Is...

Our fold-over Library Chair solves the problem of having two pieces of furniture when there's only room for one. While in the chair position, you simply take the back of the chair and flip it forward and it will turn into a sturdy Step Stool. Another great idea for craft shows.
http://www.gcwoodworks.com/library_chair_woodworking_plan.htm
http://www.gcwoodworks.com/

Baby-Sitter Woodworking Plans

Pot Magnet


When working with nails, screws, etc. - anything magnetic, especially on top of a ladder or in an otherwise awkward place, I have a "Pot Magnet" affixed to a wristlet made of Ace bandage ON MY RIGHT wrist (I am right-handed - if you are a leftie put it on your left wrist). This holds the pesky "small magnetic items" handy to pick up with you OTHER hand for driving with hammer or screwdriver or cordless drill or whatever. Sticking them on the magnet also magnetizes them slightly, so that screws, especially, tend to stick to the phillips-head or square drive driver bit. Also, you aren't digging into your pocket and stabbing your fingers on the points - which are sharp enough in your pocket, but somehow become miraculously dulled on the trip to the wall or whatever they are to be driven into...
Submitted by Mr. Oleen


Baby Sitter Woodworking Plans... All it Takes Is Just A Flip And A Twist!
 

 Rocking Horse

High Chair 

Desk

 

Space can be a problem when you only have room for one piece of baby furniture, but you need three pieces. To solve this problem we designed the Baby-Sitter. With just a twist and a flip, the Baby-Sitter, turns into a Rocking Horse, a Desk and Seat, or a High Chair. The Baby-Sitter is three chairs in one and is both functional and fashionable. This will surely become a treasured heirloom that will be handed down from generation to generation. By request we have designed a Teddy Bear Sitter; Plan No. 201. It's half the size of the Baby-Sitter that's just right for your child's Teddy Bear or Doll.

http://www.gcwoodworks.com/baby-sitter_woowworking_plans.htm

http://www.gcwoodworks.com/

Installing Drawer Fronts

On European-style cabinets and other pieces with separate drawer fronts, install the doors and drawer boxes first. Then, once the doors are adjusted properly, install the drawer fronts to match. Put double-sided carpet tape on the fronts of the drawer boxes, and position of the drawer faces. Once you have them stuck on, in the right positions, slide the drawers open and screw the faces on from inside.

Wine Barrel Adirondack Chair Woodworking Plans

You are about to have the most enjoyable woodworking experience in building our Green, Ergonomic Wine Barrel Adirondack Chair. One of the first things you will notice during construction is the very pleasant aroma of the wine from the barrel.

Our Wine Barrel Adirondack Chair is one of the most comfortable wooden chairs that you will ever sit in. The curved back, the curved seat and the curved arms allows your body to actually mold to the chair. The chair provides maximum comfort combined with a high back design that creates a chair that is truly a joy to sit in.  Wine Barrel Chair measures: 41" H  x  30" W  x  36" L

For more information go to http://www.gcwoodworks.com/Wine-Barrel-Adirondack-Chair-Large.htm  or  http://www.gcwoodworks.com

Woodworking Tips, Wood Plans and Color to Dye For

Color to Dye For



Instead of buying expensive pre-mixed stains to color your projects, try using Rit dye instead. This water-based dye is available in the laundry section of most grocery stores. It comes in a variety of colors, which can be mixed to suite your project. Experiment with a piece of scrap until you get the color and intensity you desire.

Decorative Bird Houses & Bird Feeders Wood Plans

A wonderful experience awaits you when you build one of our new Bird Houses or Bird Feeders. Our plans are designed so that just about anyone can build their very own Bird House or Bird Feeder from our plans. Customers can choose to add the Mini Wooden Accessories to give it a unique mystical look. The plans are actually large blueprints, which contain; Preliminary Procedures, Material List, Cutting List, Step-By-Step Instructions, and Detailed Illustrations. Everyone, including your fine feathered friends, will be impressed with your new Bird Houses and Bird Feeders.  For more information go to http://www.gcwoodworks.com/  or  http://www.gcwoodworks.com/bird_houses_decorative_woodworki.htm

Woodworking Tips and Award Winning Woodworking Plans

Softening Hardened Putty Sticks

Colored putty sticks are handy for filling nail holes, but they sometimes get hard with age and become difficult to use.  When this happens, I soften the stick before using it by immersing an end in very hot water for about a minute.  Don't submerge too much of the stick, or it will get too soft for you to hold properly.

Rocking Airplane Woodworking Plans

Capture That Feeling Of Aerial Adventure!

Your child or grandchild can experience a flying adventure without having to leave the house. Designed with 1 1/2" solid wood that will stand up to even the most active young pilots. You'll receive both the Piper Cub and the Fighter Jet in this set of plans.   For more information go to http://www.gcwoodworks.com/rocking_airplanes_woodworking_pl.htm  or  http://www.gcwoodworks.com/

Woodworking Tips and Woodworking Plans

Woodworking Tips and Woodworking Plans

Old Mouse Pad

Hey, Don't throw away that old mouse pad! When cut to size and glued with silicone or shoe goop, or stapled to a board it makes an excellent pusher! (You may need to remove the mouse surface material first.) Cut them up to various sizes and use them all over the place. I've even cut them to fit a wooden mallet to eliminate marring. Glue them to old clamps, as well as jigs to hold wood pieces in place. Try them, they work great!

Wine Rack Woodworking Plans

52 bottles of wine in all.  That's right, you can put 52 bottles of wine in this Wine Rack.  This woodworking plan, like all of our woodworking plans for wood projects are actually LARGE woodworking blueprints that have Step-By-Step Instructions, Detailed Woodworking Illustrations and best of all, our woodworking plans have Full Size Templates. There is no need to redraw our plans, you simply trace the Full Size Templates onto your wood using Tracing Paper.  Size: 13" deep x 24 3/4" wide x 69" tall.  For more information go to http://www.gcwoodworks.com/wine_rack_woodworking_plan.htm  or http://www.gcwoodworks.com/

FREE Woodworking Tips and Woodworking Plans

FREE Woodworking Tips and Woodworking Plans
Where to Put the Tack Cloths?


Tack cloths have a bad habit of drying out after a couple of uses. To keep a used one available, bunch it up into a loose ball and place it in a plastic food storage container with a tight lid.

The Library Chair Woodworking Plan

You Won't Believe How Useful This Chair Is...

Our fold-over Library Chair solves the problem of having two pieces of furniture when there's only room for one. While in the chair position, you simply take the back of the chair and flip it forward and it will turn into a sturdy Step Stool. Another great idea for craft shows.  To order the plans or for more information go to http://www.gcwoodworks.com/library_chair_woodworking_plan.htm  or http://www.gcwoodworks.com/